Please Kindly notice:
Packaged included: 1pcs Reborn2,1pcs PEI plate and 1 set leveling set.
Dear buyer, please kindly notice this link only for my Russia buyers, please do not place an order here, if you did, we will cancel your order, hope you can understanding!
Dear Russia buyers,please kindly notice, due to US sanction,my bank account only received QIWI pay, QIWI cannot pay over 150 dollars one time due to sanction, therefore, please complete your order by pay 4times, we are sincerely sorry It is so trouble.
Product Features:
1. All-aluminum frame structure
Fully enclosed metal frame, durable and won’t deformation
2. Core X-Y Structure
More high printing speed thanks to super low motion inertial.
3. Super less rate hose blockage
Hose inner wall 0.2um roughness, reduce the blockage rate to insure
the high-precision
4. The high running accuracy
The XYZ shafts are all linear guides to improve the running accuracy
5. 220V Silicone Heating Bed
The hot bed was heated with 220v silicone, faster heating speed and more uniform.
6. The Newest Design Extruder
Direct extruder, reduced extruder distance, for more high extruder precision
Cleaning filament Easily, Removable feeding hole clean the blocked filament inside easily
More High Extruder Reduction Ratio, The Ratio keeps to 1:7.5, More fast and stable extruder results
Real-time observation，Transparent extruder，watching and checking the extrusion status directly
Dual cooling fan, improving the model surface printing quality.
7. Linear advance function
The extruder adopts tmc2209 drive to bring higher quality printing.
8. Colorful touch screen
High sensitive screen operating, comfortable and simple to use.
9. Wi-Fi connection Function
the way users upload printing file fast and simple
10. Filament run-out Sensor
The runout sensor function, will automatically Pause when filament out or break.
11. The Resume printing
the printer can keep printing if the power failure, less worries about the power off.
12. Easy and fast installation
80% of the accessories have been Pre-installed, come with detailed installation videos are attached, just spend several minutes to start your printing easily
13. Foldable Insulation Cover
Adjustable temperature fan inside，helps to all Filament printing in a good warm keeping condition，as well as ABS filament also printing easily.
2. Core X-Y Structure
More high printing speed thanks to super low motion inertial.
3. Super less rate hose blockage
Hose inner wall 0.2um roughness, reduce the blockage rate to insure
the high-precision
4. The high running accuracy
The XYZ shafts are all linear guides to improve the running accuracy
5. 220V Silicone Heating Bed
The hot bed was heated with 220v silicone, faster heating speed and more uniform.
6. The Newest Design Extruder
Direct extruder, reduced extruder distance, for more high extruder precision
Cleaning filament Easily, Removable feeding hole clean the blocked filament inside easily
More High Extruder Reduction Ratio, The Ratio keeps to 1:7.5, More fast and stable extruder results
Real-time observation，Transparent extruder，watching and checking the extrusion status directly
Dual cooling fan, improving the model surface printing quality.
7. Linear advance function
The extruder adopts tmc2209 drive to bring higher quality printing.
8. Colorful touch screen
High sensitive screen operating, comfortable and simple to use.
9. Wi-Fi connection Function
the way users upload printing file fast and simple
10. Filament run-out Sensor
The runout sensor function, will automatically Pause when filament out or break.
11. The Resume printing
the printer can keep printing if the power failure, less worries about the power off.
12. Easy and fast installation
80% of the accessories have been Pre-installed, come with detailed installation videos are attached, just spend several minutes to start your printing easily
13. Foldable Insulation Cover
Adjustable temperature fan inside，helps to all Filament printing in a good warm keeping condition，as well as ABS filament also printing easily.
Product Parameters
Printing size: 325*325*350mm
Bed size: 329*329mm
Printer size: 525*558*595mm
Layer thickness precision: 0.05-0.3
MAX printing speed: 150 mm/s.
Material type: PLA/ ABS/TPU/PVC /PETG/HIPS/PA/PC/NYLON
Material specifications : 1.75mm in diameter.
Positioning accuracy: Z 0.002mm, XY 0.01mm.
Nozzle diameter: 0.4mm
Hotend temperature: 350℃
Hot bed temperature: 60-110deg℃.
Extruder number: 1
Power requirements: 24V, 300W
Connectivity: WiFi, TF card, USB
Input file format: STL , OBJ , DAE , AMF
Output file format: GCode
Compatibility: Windows, Mac.
Control software: Cura.
Machine weight: 20.3(kg)
Package weight: 22.5(kg)
English
German
Italian
Russian
Spanish